Schematics for Motors Powered by Magnetism and More

magneticplans

Download all of these schematics and save them in EMF-safe containers if you wish.

The following was sent to one an INDEPENDENT AMERICAN reader in a FB chat:

PhotoVoltaics

BoPET (to be used with Pearlescent Paints in place of Mirrors)
BoPET (Biaxially-oriented polyethylene terephthalate) is a polyester film made from stretched polyethylene terephthalate (PET) and is used for its high tensile strength, chemical and dimensional stability, transparency, reflectivity, gas and aroma barrier properties, and electrical insulation.
http://people.ccmr.cornell.edu/…/m…/page2/files/Barriers.pdf
http://www.nanoscalereslett.com/conte…/…/1556-276X-9-305.pdf

Pearlescent Paints
http://imgur.com/U1jIbt7
Pearlescent or nacreous coatings or pigments possess optical effects that not only serve decorative purposes (such as cosmetics, printed products, industrial coatings, or automotive paints), but also provide important functional roles, such as security printing or optical filters.
https://domino.mpi-inf.mpg.de/…/9bfb2b2…/$FILE/EG01Paint.pdf
http://www.ramcharan.org/pdf/Pearl%20Pigments.pdf
http://www.gris.informatik.tu-darmstadt.de/…/Guenther-2005-…

Alumina effect pigment
http://imgur.com/WM7Pwmr
An alumina effect pigment is a pearlescent pigment based on alumina (aluminium oxide). The most important class of special effect pigments today exists of natural mica platelets coated with thin films of transparent metal oxides like titanium oxide and iron oxide. To expand the range of achievable color effects, further special effect pigments were developed, which use substrate materials such as aluminum oxide, silicon dioxide or borosilicate instead of mica.
http://www.koboproductsinc.com/…/(j)Kobo-InCosm07-PearlPigm…
http://www.researchgate.net/…/257379363_Hydrous_aluminasili…

Solar Technology
http://www.nsf.gov/…/specia…/science_nation/sprayonsolar.jsp
http://inhabitat.com/hypersolar-increases-solar-efficiency…/

“Alexandre Edmond Becquerel created the world’s first photovoltaic cell in 1839. In this experiment, silver chloride was placed in an acidic solution and illuminated while connected to platinum electrodes, generating voltage and current. Because of this work, the photovoltaic effect has also been known as the “Becquerel effect”. The Photovoltaic effect, a process in which two dissimilar materials in close contact produce an electrical voltage when struck by light or other radiant energy. Light striking crystals such as silicon or germanium, in which electrons are usually not free to move from atom to atom within the crystal, provides the energy needed to free some electrons from their bound condition. Free electrons cross the junction between two dissimilar crystals more easily in one direction than in the other, giving one side of the junction a negative charge and, therefore, a negative voltage with respect to the other side, just as one electrode of a battery has a negative voltage with respect to the other. The photovoltaic effect can continue to provide voltage and current as long as light continues to fall on the two materials. This current can be used to measure the brightness of the incident light or as a source of power in an electrical circuit, as in a solar power system.”

Quantum Dots in Photovoltaics
http://cdn.intechopen.com/…/InTech-Silicon_quantum_dots_for…
A quantum dot solar cell is a solar cell design that uses quantum dots as the absorbing photovoltaic material. It attempts to replace bulk materials such as silicon, copper indium gallium selenide (CIGS) or CdTe. Quantum dots have bandgaps that are tunable across a wide range of energy levels by changing the dots’ size. In bulk materials the bandgap is fixed by the choice of material(s). This property makes quantum dots attractive for multi-junction solar cells, where a variety of materials are used to improve efficiency by harvesting multiple portions of the solar spectrum.

Dye-Sensitized Photovoltaics
http://www.e-renewables.com/…/Dye-sensitized%20photovoltaic…
http://krex.k-state.edu/…/…/2097/12416/JeremyEssner2011.pdf…
A dye-sensitized solar cell (DSSC, DSC or DYSC) is a low-cost solar cell belonging to the group of thin film solar cells. It is based on a semiconductor formed between a photo-sensitized anode and anelectrolyte, a photoelectrochemical system. The modern version of a dye solar cell, also known as the Grätzel cell, was originally co-invented in 1988 by Brian O’Regan and Michael Grätzel at UC Berkeley and this work was later developed by the aforementioned scientists at the École Polytechnique Fédérale de Lausanne until the publication of the first high efficiency DSSC in 1991.

Carrier Multiplication in Photovoltaics
http://ccccchem.uci.edu/…/Generating%20Free%20Charges%20by%…
In solar cell research, carrier multiplication is the phenomenon wherein the absorption of a single photon leads to the excitation of multiple electrons from the valence band to conduction band. In the theory of a conventional solar cell, each photon is only able to excite one electron across the band gap of the semiconductor, and any excess energy in that photon is dissipated as heat. In a material with carrier multiplication, high-energy photons excite on average more than one electron across the band gap, and so in principle the solar cell can produce more useful work.

Colloids in Photovoltaics
https://books.google.com/books…

Thiols in Photovoltaics
http://www.light.utoronto.ca/…/pu…/2008/barkhouse_2008_1.pdf

Nanocrystal Acid Treatments in Photovoltaics
https://zenodo.org/…/post-deposition-Nanotechnology-revised…

Photoelectrochemical cells
http://gcep.stanford.edu/pdfs/hydrogen_workshop/MacQueen.pdf
Photoelectrochemical cells or PECs are solar cells that produce electrical energy or hydrogen in a process similar to the electrolysis of water.

Thermophotovoltaic Cells
Thermophotovoltaic (TPV) energy conversion is a direct conversion process from heat to electricity via photons. A basic thermophotovoltaic system consists of a thermal emitter and a photovoltaic diode cell.
http://web.ics.purdue.edu/~pbermel/pdf/Celanovic11.pdf
http://jxcrystals.com/…/40PVSC_Fraas_Manuscript%207-21-2014…
http://calhoun.nps.edu/…/ha…/10945/1170/04Jun_Davenport.pdf…

Micro-Thermophotovoltaic Cells
http://serve.me.nus.edu.sg/…/yang-chou-shu-li-xue-sensc%20(…

Dual-Thermophotovoltaic Cells
http://cpb.iphy.ac.cn/fileup/PDF/2013-10-108402.pdf

Thermophotovoltaic Monolithic Interconnected Modules
http://ntrs.nasa.gov/…/n…/casi.ntrs.nasa.gov/20030113048.pdf

Photovoltaic Design
http://www.uccs.edu/~rtirado/PV_Resources.pdf

Geometrical Photovoltaic design for shade tolerance
http://arxiv.org/ftp/arxiv/papers/1303/1303.4604.pdf

Photovoltaic Materials:

Amorphous silicon (a-Si) is the non-crystalline form of silicon used for solar cells and thin-film transistors in LCD displays. Used as semiconductor material for a-Si solar cells, or thin-film silicon solar cells, it is deposited in thin films onto a variety of flexible substrates, such as glass, metal and plastic. Amorphous silicon cells generally feature low efficiency, but are one of the most environmentally friendly photovoltaic technologies, since they do not use any toxic heavy metals such as cadmium or lead.
http://www.solarhome.ru/downloads/pv/a-Si_Advantages.pdf

Gallium arsenide (GaAs) is a compound of the elements gallium and arsenic. It is a III-V direct bandgap semiconductor with a zinc blende crystal structure. Gallium arsenide is used in the manufacture of devices such as microwave frequency integrated circuits, monolithic microwave integrated circuits, infrared light-emitting diodes, laser diodes, solar cells and optical windows.
http://www.nrel.gov/docs/fy13osti/57902.pdf
https://mundaylab.umd.edu/wp-content/…/JournalOfPV_20121.pdf

Cadmium telluride (CdTe) is a stable crystalline compound formed from cadmium and tellurium. It is mainly used as the semiconducting material in cadmium telluride photovoltaics and an infrared optical window. It is usually sandwiched with cadmium sulfide to form a p-n junction solar PV cell. Typically, CdTe PV cells use a n-i-p structure.
http://www.ijcea.org/papers/290-A00012.pdf

Copper indium gallium (di)selenide (CIGS) is a I-III-VI2 semiconductor material composed of copper, indium, gallium, and selenium. The material is a solid solution of copper indium selenide (often abbreviated “CIS”) and copper gallium selenide. It has a chemical formula of CuInxGa(1-x)Se2 where the value of x can vary from 1 (pure copper indium selenide) to 0 (pure copper gallium selenide). CIGS is a tetrahedrally bonded semiconductor, with the chalcopyrite crystal structure, and a bandgap varying continuously with x from about 1.0 eV (for copper indium selenide) to about 1.7 eV (for copper gallium selenide).
http://depts.washington.edu/…/2014/04/PVcelldisplaycards.pdf

Concentrator photovoltaics & High concentrator photovoltaics
http://cdn.intechopen.com/pdfs-wm/32594.pdf
http://www.isetc.org/…/Prese…/ISETC-2010-Oct20-Phil_Metz.pdf
http://www.researchgate.net/…/227421386_High_Concentrator_P…
http://gcep.stanford.edu/…/solar_workshop…/SolarKing2004.pdf
http://www.crses.sun.ac.za/…/annu…/22_November/8_Schultz.pdf
Concentrator photovoltaics (CPV) is a photovoltaic technology that generates electricity from sunlight. Contrary to conventional photovoltaic systems, it uses lenses and curved mirrors to focus sunlight onto small, but highly efficient, multi-junction (MJ) solar cells. In addition, CPV systems often use solar trackers and sometimes a cooling system to further increase their efficiency.[2]:30 Ongoing research and development is rapidly improving their competitiveness in the utility-scale segment and in areas of high solar insolation. This sort of solar technology can be thus used in smaller areas. Especially systems using high concentrator photovoltaics (HCPV), have the potential to become competitive in the near future. They possess the highest efficiency of all existing PV technologies, and a smaller photovoltaic array also reduces the balance of system costs. Currently, CPV is not used in the PV roof top segment and far less common than conventional PV systems. For regions with a high annual direct normal irradiance of 2000 kilowatt-hour (kWh) per square meter or more, the levelized cost of electricity is in the range of $0.08–$0.15 per kWh and installation cost for a 10-megawatt CPV power plant was identified to lie between €1.40–€2.20 per watt-peak (Wp).

Concentrated solar power
http://www.irena.org/…/RE_Technologies_Cost_Analysis-CSP.pdf
http://www.nrel.gov/docs/fy01osti/28751.pdf
Concentrated solar power (also called concentrating solar power, concentrated solar thermal, and CSP) systems generate solar power by using mirrors or lenses to concentrate a large area of sunlight, or solar thermal energy, onto a small area. Electricity is generated when the concentrated light is converted to heat, which drives a heat engine (usually a steam turbine) connected to an electrical power generator or powers a thermochemical reaction.

Thin-film photovoltaic cells
http://www2.kfupm.edu.sa/cent/img/KFUPM-TFSC-Dec20.pdf
https://www.tue.nl/…/EnergyDays/Serie_…/2009_02_03/Zeman.pdf

Carbon nanotubes in photovoltaics
http://arxiv.org/pdf/1206.5042.pdf
http://www.researchgate.net/…/links/54048fe80cf2bba34c1cb43…

Photovoltaic thermal hybrid solar collector
http://agronomy.emu.ee/vol10Spec1/p10s126.pdf
https://www.ecn.nl/…/ecn/u…/egon/pvt/pdf/EFP1713_00-0014.pdf

Photonics is the science of light (photon) generation, detection, and manipulation through emission, transmission, modulation, signal processing, switching, amplification, and detection/sensing. Though covering all light’s technical applications over the whole spectrum, most photonic applications are in the range of visible and near-infrared light.

Photonic Integrated Circuits
http://www.phys.sinica.edu.tw/…/Nano_MHS_TIGP_20080509_Phot…
http://www.photonics.ntua.gr/Opti…/Lecture_6_Integration.pdf
http://optoelectronics.ece.ucsb.edu/…/f…/shared/06387568.pdf
A photonic integrated circuit (PIC) or integrated optical circuit is a device that integrates multiple (at least two) photonic functions and as such is similar to an electronic integrated circuit. The major difference between the two is that a photonic integrated circuit provides functionality for information signals imposed on optical wavelengths typically in the visible spectrum or near infrared 850 nm-1650 nm.

Alternative routes towards low-cost Cu4ZnSnS4 thin film solar cells
http://ac.els-cdn.com/S0…/1-s2.0-S0257897213004064-main.pdf…
http://www.hindawi.com/journals/cpis/2013/962730/
http://web.ornl.gov/…/web_Sharp_Laboratories_MDF-TCF-Report…

Complementary metal–oxide–semiconductor
Complementary metal–oxide–semiconductor (CMOS) /ˈsiːmɒs/ is a technology for constructing integrated circuits. CMOS technology is used in microprocessors, microcontrollers, static RAM, and other digital logic circuits. CMOS technology is also used for several analog circuits such as image sensors (CMOS sensor), data converters, and highly integrated transceivers for many types of communication.
http://www.writing.ucsb.edu/…/technology_report_Alvin%20Qua…
http://www.ijareeie.com/…/2…/september/17F_Complementary.pdf
http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=6880796

Electrolysis of water
Electrolysis of water is the decomposition of water (H2O) into oxygen (O2) and hydrogen gas (H2) due to an electric current being passed through the water.
http://www.uwplatt.edu/files/urce/Vissers.pdf
http://aquarius.nasa.gov/pdfs/electrolysis.pdf
http://www.rivendellvillage.org/Stanley_Meyer_Resonant_Elec…
https://www1.eere.energy.gov/hydrogenandfuel…/…/32405b19.pdf
http://www.nrel.gov/docs/fy06osti/40605.pdf

Magnetic Energy
http://www.apfn.org/Free_Energy/plans.pdf

Permanent Magnetic Generator
http://www.cedrat.com/…/20…/12/IECON2007_generatordesign.pdf
http://www.cedrat.com/…/20…/12/IECON2007_generatordesign.pdf
http://esrdc.mit.edu/…/ESRDC_library/Rucker_Thesis_Rev13.pdf
http://eprints.whiterose.ac.uk/820/1/wangjb2.pdf

Magnetic Engines
http://www.apparentlyapparel.com/…/535…/loderspiralmotor.pdf
http://www.free-energy-info.com/Chapter1.pdf
people.ccmr.cornell.edu
people.ccmr.cornell.edu
Chat Conversation End

plans40605 (1)32405b19Stanley_Meyer_Resonant_Electrolysis_Cellelectrolysis40605Chapter1

Advertisements

Author: theindependentamericanblog

Protecting America Through Knowledge. We support freedom and oppose all violence. Be prepared to help save our country by teaching truth, warning of danger, cleaving unto Jesus the Christ and Heavenly Father, studying the Book of Mormon: Another Testament of Jesus Christ, sanctifying (and leaving, if and when necessary) your homes and neighborhoods, storing food and clean water, building HAM and personal communication trees and learn the difference between actual law (that approved by the Constitution for the united States of America) and the Vatican's foreign puppet "government" of the District of Colombia (the pagan goddess of death), known as THE UNITED STATES OF AMERICA CORPORATION. The Lord is currently destroying the latter (organized crime) group. When he is done, only the righteous will remain upon North and South America. It will be then that we survivors shall help him heal the land.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s